> AC Input:
- Input voltage: 100 ~ 240V (+-/10%) [ HOT-SWAP SOLUTION]
- Frequency: 50/60Hz.
- Power Factor Correction.

Output Voltage	+5V DC	+12V DC	+3.3V DC	-12V DC	+5VSB
Output Current(Max)	32A	49A	25A	1A	3.5A
Output Current(Min.)	1A	3A	1A	0A	0.1A
Ripple/Noise Max.(P-P):	50mv	70mv	50mv	70mv	50mV
Line Regulation:	±1﹪	±1﹪	±1﹪	±1﹪	±1﹪
Load Regulation:	±5﹪	±5﹪	±5﹪	±5﹪	±5﹪

> DIMENSION:D265 X W101 X H84mm / D10.43 x W3.98 x H3.3 (inches)
> COOLING:By forced air 2x40mm Fan (Each module)
> 2U IPC Redundant Power Supply
> Hot-swappable/Hot-pluggable, High-Density Redundant power supply
> Full Range AC Input.
> High Efficiency: 80% Typical at full load
> Hold-Up Time: 16ms at maximum load & normal input voltage.
> OVER VOLTAGE PROTECTION.
> SHORT CIRCUIT PROTECTION.
> OVER POWER PROTECTION.
> ENVIRONMENT TEMPERATURE
   Operation Temperature: 0℃to +45℃
   Cooling: BY BALL BEARING DC FAN.
   Storage Temperature:-20℃ to 70℃
   Humidity: 5% to 95%, non-condensing
> RELIABILITY Mean Time Between Failure(MTBF)
   Using MIL - HDBK -217F the calculated MTBF 100,000 hours

2+4 Pin	P4 MB	Peripheral	FDD	8-Pin	SATA	6-Pin
X 1	X 1	X 12	X 1	X 1	X 4	X 1